Siemens HiPath optiPoint 100 advance Installation And Startup page 6

Setting up the optiPoint 100 advance in a HiPath system without DHCP server
6
If there is no DHCP server integrated into your HiPath environ-
ment, you have to enter the IP address and the subnet mask ma-
nually via your dialling keypad. First you have to switch off the
DHCP function.
No IP address
Service:
1=Status?
Enter Admin password
_
Enter Admin password
****** Continue with OK
Administration:
00=End?
Network:
00=End?
Network:
01=DHCP IP assign?
DHCP IP assign:
Change?
Network:
01=DHCP IP assign?
>
Change to "Service"
07.02.01
> and
?
call menu
Enter digit "6"
>
Enter Admin password
> (Default: "123456")
and
?
Confirm
>
>
Change to "network"
> and
?
call menu
>
Change to
> "DHCP IP assign"
and
?
On
Confirm
>
?
On
Confirm the change
>
Off
Function is switched off
>
h
Back to Basic menu