Stat-Alert Call Alert Operation; Receiving A Call Alert Page - Motorola MTX1550 User Manual

To Enter a Number from a Location in the Call List
4a Press either , or / to enter the call
list.
4b Enter the first digit of the location number. If
there are fewer than 10 members in the list,
go directly to Step 4e.
4c If there are 10 or more members in the list,
the display shows "ID LOC#X_" (where X is
the first digit). The cursor blinks to show the
location of the second digit.
4d Enter the second digit of the location number.
4e The radio goes to that
position in the list. The
display alternates
between showing the
member's name and ID
number.
Note: The last member of the list is also the "last ID
transmitted or received" at position "00" on
the list.
• If you enter a location number that does
58
English
Alternates between
CK TANG
ID: 2350
not exist (for example, "15"), the display
shows "INVALID ENTRY," and the radio
sounds an invalid-keypress tone and
returns to Step 4b of this procedure.
Sending the Radio ID Number
5 Press the PTT switch to transmit the ID
number. If enabled, an alert tone sounds
during the transmission of the radio ID
number. After the alert tone, you may talk.

STAT-ALERT CALL ALERT OPERATION

Stat-Alert Call Alert is a per-radio feature that
provides a convenient way for the dispatcher to
page you through your radio. This is especially
useful in noisy environments, or when you need to
be away from your radio equipment.

Receiving a Call Alert Page

1 Upon receiving a Call Alert page, four alert
and
tones sounds (repeats every 5 seconds).
2 The green LED lights and the Call Received
annunciator, F, blinks indicating a call is
received.
3 The display shows the Caller ID, and then
alternates between the home display, and
"PAGE RECEIVED".
4 Press the PTT switch to answer the page. You
may have to make a voice selective call, if the
radio that paged you is on selective call mode.