Motorola MTX1550 User Manual page 59

Initiating a Voice Selective Call
1 Press / until CALL is
displayed.
2 Press l (the softkey below CALL).
3 The display shows the
last ID number
transmitted or received.
Entering the Desired Radio ID Number
If the last ID number called is the desired number,
go directly to Step 5.
To Enter a New Number
4a Enter the new four-digit ID number using the
keypad.
4b On the display, the old ID number disappears
and the new digits appear as they are being
entered.
4c The cursor blinks indicating the location of the
next number to be entered.
Note: Once you have started entering numbers,
the , key functions as a backspace key.
Pressing it causes the last digit entered to be
erased, and the cursor moves to the left.
ZONE MUTE CALL
ID: 2350
To Enter a Number from the Call List
4a Press either , or /.
4b / takes you forward to the first or next
member of the list; , takes you
backwards to the last or previous member of
the list.
4c When at a member of
the list, the display
alternates between
showing the member's
name and ID number.
When the last digit is erased, an additional
press of this key causes the last ID number
transmitted or received to be displayed;
pressing / shows the first member of the
list.
• If automatic Selective Call is enabled, your
radio remains in Selective Call until you
exit the mode. If automatic Selective Call is
disabled in your radio,
immediately exits Selective Call when you
release the PTT.
• In both Selective Call and Call Alert, a * will
match any number in the ID position. For
example, paging ID 000* will page all IDs
from 0000-0009. Paging **** will page all
radios on the system.
Alternates between
CK TANG
ID: 2350
the radio
and
57
English