Ptt-Id; Radio Check; Emergency Operation - Motorola MTX1550 User Manual

Sending the Call Alert
4 Press the PTT switch to transmit the ID
number.
If the Page is Unsuccessful
5a If the called radio fails to acknowledge the
alert, a low-pitched alert tone sounds and the
display changes to "NO ACKNOWLEDGE".
5b Press the PTT switch to send the ID number
again, or press
to the home display.
If the Page is Successful
5a If you hear five beeps, the radio you are
paging is on the air and has received your
page.
5b The radio automatically
returns to the home
display
60
English

PTT-ID

Stat-Alert PTT-ID is a per-mode feature describing
an identification code transmission that is tied to the
PTT switch. The ID code is automatically sent every
time a voice transmission occurs (that is, the PTT
switch is pressed). When PTT-ID comes before the
voice transmission, you will hear a tone until the ID
transmission is completed; this helps you avoid
talking while the ID code is being transmitted. This
tone can be disabled on a per-radio basis. Also, the
ID code transmission can be programmed to follow
to hang up and return
the voice transmission.

RADIO CHECK

This feature allows the dispatcher to determine if a
radio unit is on the air without disturbing the radio
operator. This is a useful tool for the radio
dispatcher to use for routine maintenance checks,
or if there is reason to doubt the availability of a
radio unit. When the dispatcher "checks" for the
radio, the radio receives the command and
PLANT POLICE
automatically acknowledges it. The transmit (red)
LED lights when the radio sends the
acknowledgement.

EMERGENCY OPERATION

Please refer to Emergency Operation on page 46.