Service Interval Display - Skoda 2014 Yeti Owner's Manual

Further information » page 142, Parking aid.
Alt. speed dis.
Here, the display of the second speed in mph
Further information » page 31, Display of the second speed.
Service
The days and kilometres remaining until the next service can be displayed
here.
Further information » page

47, Service interval display.

Factory setting
The factory setting of the functions of the MAXI DOT display can be restored
here.
Compass point display

Read and observe and
For vehicles with a factory fitted navigation system, an abbreviation for each
point of the compass (depending on the current direction of travel) is shown
on the top left-hand corner of the display.
The compass point display only operates when the ignition is switched on.
Service interval display

Introduction
This chapter contains information on the following subjects:
Prompt in the MAXI DOT display
Prompt in the segment display
Resetting the service interval display
The service interval display shows the time and mileage to the next service
event.
The service due date is automatically displayed on the display and this infor-
mation can be displayed manually if necessary.
1)
For models with the speedometer in mph, the second speed is displayed in km/h.
can be activated.
1)
on page 45 first.
The kilometre indicator or the days indicator reduces in steps of 100 km or,
where applicable, days until the service due date is reached.
The information regarding the service intervals can be found in the service
schedule.
Note
Information is retained in the Service Interval Display even after the vehicle
battery is disconnected.
Prompt in the MAXI DOT display
Oil change service
If an oil change service is due, the following message appears: Oil change in ...
km or ... days.
As soon as the service interval date has been reached, the message Oil
change now! appears once the ignition has been switched on!
Inspection
If an inspection is due, the following message appears: Inspection in ... km
or ... days.
As soon as the service interval date has been reached, the message Inspec-
tion now! appears once the ignition has been switched on!
Displaying the distance and days until the next service interval
You can view the remaining distance and days until the next service appoint-
ment at any time when the ignition is switched on by going to the Service
menu item » page 45, Settings or from the Vehicle status in the main menu of
the Maxi DOTdisplay. » page
The following message is displayed for 10 seconds.
47
Oil change ... km / ... days
48
48
Inspection ... km / ... days
45, Main menu .
Information system
47