Broadcastvision Tv Preset Programming Instructions; Tv Programming; Entering Test Mode; ►Entering Bv Setup Mode - True CS800 Troubleshooting Manual

Broadcastvision TV Preset Programming Instructions

2 Window Display for TRUE FITNESS Treadmills and Bikes
NOTES:
Bikes Only: Because this is a self-generating product, you must
continue to pedal during this procedure.
Treadmills: Plug in treadmill and flip power switch ON.
Text messages shown on display are indicated below in "QUOTATION
MARKS".
Key names are indicated below in BOLD CAPS.
Broadcastvision is abbreviated BV below.

TV Programming

1.Note the number of TV's visible in the facility room that you intend to
program audio setup for.
►ENTERING TEST MODE (NOTE: STEPS 1 – 4 are time dependent.
Press keys quickly)
Step 2. Press and hold the CLEAR ENTRY key until display blanks, then
quickly proceed to STEP 3.
Step 3. Press and hold the ENTER key until you hear a beep, then
quickly proceed to STEP 4.
"PASS CODE" will display.
Step 4. Press the following number keys in sequence 2 0 1 7 3 and press
the ENTER key.
"CONSOLE VERSION" will display.
►ENTERING BV SETUP MODE
1.Press the ENTER key repeatedly until "BV SETUP" is displayed.
2.Press the START key on center pod to enter BV SETUP mode.
"ENTER PROG MODE" will display.
3.Press the 2 key to select BV Series 2.
"LOAD BV SERIES 2" will display.
NOTE: These Displays are optimally designed to work with
Broadcastvision transmitters which should be part of this wireless
installation. If non-Broadcastvision transmitters are being used, one
should try at this point of these instructions to press 4 to LOAD BV
SERIES 4 for Mye
SERIES 8 for Cardio Theater
SERIES 9 for Cardio Theater
reception under these circumstances.
® ®
/ Fantaay transmitters or press 8 to LOAD BV
®
LCS transmitters or press 9 to LOAD BV
®
xTV transmitters. This may allow for