Jp11 (Front Usb Device Wake Up Selection) - AMD 7ZX Series User Manual

JP11: Front USB Device Wake up Selection (USB Port
JP10: BIOS Write Protection (Optional)
1
USB2
Pin No.
1-2 close Normal (Default)
Enabled Front USB Device
2-3 close
Wake up
(If you want to use "USB Dev Wakeup From S3-S5"
function, you have to set the BIOS setting "USB Dev
Wakeup From S3-S5" enabled, and the jumper "JP11"
enabled).
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item "POWER MANAGEMENT SETUP", then
select "USB Dev Wakeup From S3-S5: Enabled".
Remember to save the setting by pressing "ESC" and
choose the "SAVE & EXIT SETUP" option.)
1
Pin No.
ON Write Protect Enable
Write Protect Disable
OFF
(Default)
Please Set Jumper JP10 to "OFF" to enabled
BIOS Write Function when you update new BIOS
or new device
20
Panel and Jumper Definition
USB2)
Definition
Definition