Garage Door Opener - Toyota Prius 2007 Owner's Manual

WWW.MANUALS.WS

Garage door opener

Indicator light
28p128
Buttons
The garage door opener (HomeLink
Universal Transceiver) is manufactured
R
under license from HomeLink and can
be programmed to operate
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
WWW.MANUALS.WS
(a) Programing the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programing into the
R
HomeLink , install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
R
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
market".
garage
R
When the programming the HomeLink
the first time, erase
memory once before following the steps
below to program the HomeLink
"(c) Erasing the
memory" on page 312. When carrying out
(c), do not hold the buttons for longer
than 30 seconds.)
When registering the second and third sig-
nals, simply follow the steps listed below.
If you erase the
again, any signals registered previously
will be erased.
1. Decide which of 3 HomeLink
you want to program.
R
for
R
the HomeLink
R
. (See
R
entire HomeLink
R
HomeLink memory
R
buttons
309