Locking The Doors With Smart Function; Side Door; Back Door - Toyota Prius 2007 Owner's Manual

Hide thumbs Also See for Prius 2007:
Table of Contents

Advertisement

WWW.MANUALS.WS
21p128

Side door

21p139

Back door

30
WWW.MANUALS.WS
LOCKING THE DOORS WITH SMART
FUNCTION
The smart entry and start system will
lock the doors without being inserted
into the door keyhole.
When you exit the vehicle carrying the
smart key and push the lock button on the
outside front door handle or back door
with all the doors closed, all the doors will
be locked provided that the electronic
code in the key corresponds to the regis-
tered ID code for the vehicle.
At this time, you will hear one beep and
the turn signal lights flash once. However,
when you push the lock button on the
outside front door handle or back door
with any door not closed securely, a beep
sounds for 10 seconds.
NOTICE
If the key is in the vehicle, do not
perform door locking operation, or
you might lock your keys inside the
vehicle.
INFORMATION
D
The rear doors are not equipped
with smart function.
D
When locking the doors, be sure to
push the lock button on the outside
front door handle or back door
slowly and surely. If you push the
button quickly, the doors may not
lock.
D
When opening or closing a door, do
not touch the lock button on the
outside door handle or back door. If
you
push
the
button,
an
alarm
sounds 10 seconds.
D
When a wireless remote control is
used to lock the doors and a smart
key is left in the effective range of
the smart function in the vehicle,
the doors cannot be unlocked using
the smart function. In this case, use
the wireless remote function to un-
lock the doors.
D
You cannot activate smart unlocking
functions within 3 seconds after the
smart locking function is activated.

Advertisement

Table of Contents
loading

Table of Contents