Reconnecting The Bluetoothr Phone - Toyota Prius 2007 Owner's Manual

WWW.MANUALS.WS
27p190
(b) manually
When the auto connection failed or
turned off, you have to connect
Bluetoothr manually.
Touch the "Connect" switch after hav-
ing enabled the Bluetoothr connection
on the phone.
WWW.MANUALS.WS
27p191
When the connection is completed, this
screen is displayed.
Now you can use the Bluetoothr phone.

Reconnecting the Bluetoothr phone

If the Bluetoothr phone is disconnected
with a poor reception from
Bluetoothr network when the "ACC" or
"IG−ON" mode is enabled, the system
automatically reconnects the Bluetoothr
phone. In this case, the connection
result is not displayed.
If the Bluetoothr is disconnected on pur-
pose such as you turned your cellular
phone off, this does not happen.
nect it by the following methods.
Select the Bluetoothr phone again.
Enter the Bluetoothr phone.
the
Recon-
179