Toyota Prius 2007 Owner's Manual page 310

WWW.MANUALS.WS
28p130a
R 25 to 75 mm
HomeLink
(1 to 3 in.)
Hand−held
garage transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
R
the surface of the HomeLink .
Keep the red indicator light on
R
HomeLink in view while programming.
310
WWW.MANUALS.WS
28p131
3. Simultaneously press and
hand−held garage transmitter
along with the selected HomeLink
ton.
the
Do not release the buttons until step 4
has been completed.
4. When the indicator light
R
HomeLink changes from a slow to a
rapid flash, you can release both but-
tons.
28p132
hold the 5. Test the operation of the HomeLink
button pressing the newly programmed button.
R
but- If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
on the
"Rolling Code" type. Press and hold the
programmed HomeLink
rage door has the rolling code feature if
the indicator light (on the HomeLink
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
the "Rolling Code" type, proceed to the
heading "Programming a rolling code sys-
tem".
R
by
R
button. The ga-
R
)