Table of Contents
Advertisement
also illuminate in conjunction with other sym-
bols.
Action:
1. Stop in a safe place. Do not drive the car
further.
2. Read the information on the information
display. Implement the action in accord-
ance with the message in the display. Clear
the message using the READ button.
Reminder – doors not closed
2
If one of the doors, the bonnet
not closed properly then the information or
warning symbol illuminates together with an
explanatory text message in the combined
instrument panel. Stop the car in a safe place
as soon as possible and close the door, bonnet
or boot lid, whichever is open.
If the car is driven at a speed lower than
approx. 7 km/h then the information
symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
2
Only cars with alarm*.
Trip meter
or boot lid is
Trip meter and controls.
Display for trip meter
Controls for switching between trip meters
T1
T2
and
meters.
The meters are used to measure short dis-
tances.
One short press on the control switches
between the two trip meters
press (more than 2 seconds) resets an active
trip meter to zero. The distance is shown in the
display.
03 Your driving environment
, as well as resetting the trip
T1
and
T2
. A long
*
Option/accessory, for more information, see Introduction.
Instruments and controls
Clock
Clock and setting knob.
Display for showing the time.
Controls for setting the clock.
Turn the knob clockwise/anticlockwise to set
the clock. Turn first to the end position and then
turn past/over the end position a further
approx. 1 mm - a "click" sounds and is felt in
the button. Each "click" scrolls 1 minute. In
order to change quickly - hold in the "click
position".
In connection with a message the clock can be
temporarily replaced by a symbol, see
page 128.
03
67
Advertisement
Table of Contents
