Table of Contents
Advertisement
07 Maintenance and service
Lamps
Lighting, cargo area
1. Insert a screwdriver and gently prize so
that the lamp housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
back the lamp housing.
07
264
Vanity mirror lighting
Removing the mirror glass
1. Insert a screwdriver underneath the lower
edge, in the centre. Carefully prize up the
lug on the edge.
2. Insert the screwdriver underneath the edge
on the left and right-hand sides (by the
black rubber sections), and prize carefully
so that the mirror glass comes loose in the
lower edge.
3. Carefully detach and lift aside the entire
mirror glass and cover.
4. Replace the bulb.
Securing the mirror glass
1. Press the three lugs at top edge of the mir-
ror glass back into position.
2. Then press the three lower lugs back into
position.
Specification, bulbs
Lighting
W
Extra main beam,
55
Xenon, ABL
Dipped beam, hal-
55
ogen
Main beam, Halo-
65
gen
Brake light
21
Reversing lamp
21
Rear fog lamp
21
Front direction
21
indicators
Direction indica-
21
tors, rear/
Front fog lamps
35
Cargo area light-
5
ing, number plate
lighting
Vanity mirror
1.2
Type
H7
H7
H9
P21W
P21W
P21W
H21W
PY21W
H8
Tubular
lamp SV8.5
W2x4.6D
Advertisement
Table of Contents
