Table of Contents
Advertisement
Extra main beam, Xenon*
1. Detach the headlamp.
2. Remove the cover, see page 260.
3. Detach the bulb by pressing the holder
downwards.
4. Unplug the connector from the bulb.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
Position/parking lamps
1. Detach the headlamp.
2. Remove the cover, see page 260.
3. For better access, detach the main beam
bulb first.
4. Pull the cable in order to withdraw the bulb
holder.
5. Remove the blown bulb and fit a new one.
It can only be secured in one position.
6. Fit the bulb holder in the socket and press
until a clicking sound is heard.
Reinstall the parts in reverse order.
07 Maintenance and service
Direction indicators/flashers
1. Detach the headlamp.
2. Remove the small round cover.
3. Pull the bulb holder in order to extract the
bulb.
4. Remove the blown bulb and fit a new one.
It can only be installed in one way.
5. Fit the bulb holder in the socket and press
until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
*
Option/accessory, for more information, see Introduction.
Lamps
07
``
261
Advertisement
Table of Contents
