Table of Contents
Advertisement
Locking
Cars with the keyless system have a button on the
outside door handles.
Lock the doors and the boot lid by pressing the
lock button on one of the door handles on the
outside.
All doors and the boot lid must be closed
before the car can be locked - otherwise the
car is not locked.
NOTE
On cars with automatic transmission, the
gear selector must be set in the P position
– otherwise the car cannot be locked or the
alarm armed.
2
Only in combination with power driver's seat and power mirrors.
Unlocking
Unlocking takes place when a hand grasps a
door handle or the boot lid's rubberised pres-
sure plate is actuated - open the door or boot
lid as normal.
Unlocking with the key blade
To access the lock cylinder the door handle's
plastic cover must be detached:
1. Press the key blade approx. 1 cm straight
up into the hole on the underside of the
door handle/cover - do not prize.
> The plastic cover is prized loose auto-
matically by the torque when the blade
is pushed straight up and into the open-
ing.
02 Locks and alarm
2. Insert the key blade in the lock cylinder and
unlock the door.
3. Refit the plastic cover after unlocking.
NOTE
When the driver's door is unlocked using the
key blade and is opened, the alarm is trig-
gered. It is switched off by inserting the PCC
in the ignition switch, see page 57.
2
Key memory
– driver's seat and door
mirrors
PCC memory function
If several people each with a PCC approach the
car, then the settings for seat and mirrors are
implemented for the person who opens the
driver's door.
After the driver's door has been opened by
person A with PCC-A, but person B with PCC-
B shall drive, the settings can be changed in
three ways:
•
Standing by the driver's door, or sitting
behind the steering wheel, person B
*
Option/accessory, for more information, see Introduction.
Keyless drive*
02
``
49
Advertisement
Table of Contents
