Tuner Features; Tuning Mode - Kenwood KDC-X990 Instruction Manual

Tuner features

Tuning
Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob towards [FM], it
switches between the FM1, FM2, and FM3 bands.
3
Tune up or down band
Push the Control knob towards [4] or
[¢].
• During reception of stereo stations the "ST" indicator
is ON.
NEXT
VOL AUTO/AME
Band display
1
Tuner
2
FM1-1ch 107.7 MHz
3
4
SNPS
5
6
Preset station number
Frequency display
ST indicator

Tuning Mode

Choose the tuning mode.
Press the [AUTO] button.
Each time you press the button, the Tuning
mode alternates between the modes shown in
the table below.
Tuning mode Display
Auto seek "Seek Mode:
Auto1"
Preset station seek "Seek Mode:
Auto2"
Manual "Seek Mode:
Manual"
SRC
Control knob
Operation
Automatic search for a station.
Search in order of the stations
in the Preset memory.
Normal manual tuning control.
29
|
English