Sirius Tuner Control Features; Select Sirius Satellite Radio Mode; Switching Seek Mode; Select The Channel - Kenwood KDC-X990 Instruction Manual

SIRIUS tuner control features

Select SIRIUS Satellite Radio Mode

Selecting the SIRIUS Satellite Radio Tuner
(optional accessory) connected to this unit.
Selecting SIRIUS Mode
Press the [SRC] button.
Select the "SIRIUS" display.
• You need to subscribe to SIRIUS to receive the service
by SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-
539-SIRIUS TO SUBSCRIBE" appears.
• The radio may take a little time to start receiving after
you select the SIRIUS source.
• If the signal reception fails, "Acquiring Signal" appears.
38
|
English
NEXT
VOL AUTO
Band display
1
SIRIUS
2
SR1-1ch
3
4
Channel Name
5
Category Name
6
Preset station number
Channel number
CH-200

Switching Seek Mode

Sets the seeking mode.
Press the [AUTO] button.
Each time you press the button, the Seek mode
alternates between the operations shown in the
table below.
Display Operation
"Seek Mode: Channel" Normal manual seeking control.
"Seek Mode: Preset" Search in order of the channels in the Preset
memory.

Select the channel

Selecting the channel.
Push the Control knob towards [4] or
[¢].
SRC
Control knob