Dimmer; Dual Zone System Setting; System Q; Bass Management System) - Kenwood KDC-Z737 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-Z737:
Table of Contents

Advertisement

Dimmer

Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display
"Dimmer ON"
"Dimmer OFF"

System Q

Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display
Setting
"System Q ON"
The System Q factors are displayed.
"System Q OFF"
The System Q factors aren't displayed.
Built-in Amp Mute Setting <In Standby mode>
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display
Setting
"AMP Mute OFF"
The built-in amplifier activates.
"AMP Mute ON"
The built-in amplifier deactivates.
Setting
The display dims.
The display doesn't dim.
— 27 —
Dual Zone System Setting <In Standby mode>
<When the Dual Zone System is ON >
Setting the Front channel and Rear channel sound when the
Dual Zone System is ON.
Display
Setting
"Zone 2 Rear"
The front is this unit's internal source, and the
rear is Auxiliary input sound.
"Zone 2 Front"
The rear is this unit's internal source, and the
front is Auxiliary input sound.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the
main unit.
Display
Setting
"AMP Bass Flat"
Bass boost level is flat.
"AMP Bass +6"
Bass boost level is low (+6dB).
"AMP Bass +12"
Bass boost level is mid (+12dB).
"AMP Bass +18"
Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
• For amplifiers there are the model that can be set from Flat to +18
dB, and the model that can be set from Flat to +12 dB.
When an amplifier is attached that can only be set to +12, even if
"AMP Bass +18" is selected it won't operate correctly.

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.
Display
Setting
"AMP Freq Normal"
Boost with the normal central frequency
"AMP Freq Low"
Drop the normal central frequency 20%
Function of the KDC-Z838

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-z838

Table of Contents