Table of Contents
Advertisement
General features
System Q
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Flat
User memory
Rock
Pops
Easy
Top 40
Jazz
• User memory: The values set on the <Audio Control> (page 9).
• Each setting value is changed on the <Speaker & Woofer Setting>
(page 10) or <Speaker Setting> (page 10). First, select the Speaker
and Woofer type with the <Speaker & Woofer Setting> or
<Speaker Setting>.
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
Display
"FLAT"
"User Preset"
"ROCK"
"POPS"
"EASY"
"TOP 40"
"JAZZ"
Function of the KDC-Z737
— 10 —
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
Speaker & Woofer Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker and woofer type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker & Woofer Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3
Select the Setting mode
Press the [FM] or [AM] button.
Each time the button is pressed it switches between Speaker
setting mode and Woofer setting mode.
4
Select the Speaker and Woofer type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Display
"OFF"
"5/4 inch"
"6
9/6 inch"
*
"O.E.M."
Function of the KDC-Z838
Advertisement
Table of Contents
