Volume; Attenuator; Loudness; Audio Control - Kenwood KDC-Z737 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-Z737:
Table of Contents

Advertisement

Attenuator

Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.

Loudness

Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4
Adjust the Audio item
Press the [4] or [¢] button.
Adjustment Item
Bass Center Frequency "Bass FRQ"
Bass level
Bass Q Factor
Bass Extend
Middle Center
Frequency
Middle level
Middle Q Factor
Treble Center Frequency"TRE FRQ"
Treble level
Balance
Fader
Non-Fading level*
Front High Pass Filter* "HPF Front"
Rear High Pass Filter*
Non-Fading
Low Pass Filter*
Non-Fading Phase*
Volume offset
• According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
Bass Q Factor
1.00/1.25/1.50
2.00
• When the bass extend is set to ON, low frequency response is
extended by 20%.
• Volume offset: Each source's volume can be set as a difference
from the basic volume.
• * :Function of the KDC-Z838
5
Exit Audio Control mode
Press the [AUD] button.
— 9 —
Display
Range
60/70/80/100 or 150 Hz
"Bass"
–8 — +8
"Bass Q"
1.00/1.25/1.50/2.00
"Bass EXT"
ON/OFF
"MID FRQ"
0.5/1.0/1.5/2.0 kHz
"MID"
–8 — +8
"Middle Q"
1.0/2.0
10.0/12.5/15.0/17.5 kHz
"TRE"
–8 — +8
"Balance"
Left 15 — Right 15
"Fader"
Rear 15 — Front 15
"NF Level"
–15 — +15
Through/40/60/80/100/
120/150/180/220 Hz
"HPF Rear"
Through/40/60/80/100/
120/150/180/220 Hz
"LPF NF"
50/80/120/Through Hz
"NF Phase"
Normal (0°)/
Reverse (180°)
"Volume Offset" –8 — ±0
Bass Center Frequency
60/70/80/100
60/70/80/150

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-z838

Table of Contents