Stereo Receiver: Sx-P01, Sx-P01Dab - Pioneer N-P01-S Operating Instructions Manual

12
12
SNR (Signal Noise Rate)
Noise may be generated and reception quality may become
poor according to Signal Noise Rate. If reception quality is
poor, move the antenna in different directions to find a
position where the good rate is displayed.
BBC
SNR:100
DLS (Dynamic Label Segment)
When tuned to a station which is broadcasting DLS text data,
the text will scroll across the display.
BBC
All the late
Audio Mode
Displays the audio mode (stereo or mono).
BBC
DAB Stereo
Frequency
Displays the frequency of the current multiplex.
BBC
FREQ:239.200MHz
Multiplex Name
Displays the name of the current multiplex.
BBC
BBC Station
Bitrate
Displays the bit rate.
BBC
BITRATE:192kbps
50
DAB setup
1
Press the CONTROL RCV button on the remote control.
2
Press the TOP MENU button.
Press the / button to select the item to be set, then
3
press the ENTER button.
The following settings are available for DAB.
DRC
The DRC (Dynamic Range Control) function lets you change
the dynamic range of the received sound depending on the
content of the broadcast so that the sound is easier to hear
even when the volume is low.
Press the / button to select the following options, and
Scroll
then press the ENTER button.
DRC:Off : DRC is switched off.
Any DRC level broadcast will be ignored. This is the default
setting.
DRC:On : Applies DRC level as sent with the broadcast.
Component Reset
Deletes all the stations.
While "Reset: Yes?" appears, press the ENTER button.
Using the tuner (Stereo receiver: SX-P01, SX-P01DAB)