Safety Precautions - Samsung AEN160YDEHA Installation Manual

Safety precautions

All materials supplied to this manual are indispensable for the safety of equipment.
Users shall establish appropriate safety and health practices and determine the applicability of
regulatory limitation based on following descriptions prior to use.
WARNING
G
ENERAL INFORMATION
Carefully read the content of this manual before installing the air to water heat pump and store the
manual in a safe place in order to be able to use it as reference after installation.
For maximum safety, installers shall always carefully read the following warnings.
Store the user and installation manual in a safe location and remember to hand it over to the new owner
if the air to water heat pump is sold or transferred.
This manual explains how to install an indoor unit with a split system with two SAMSUNG units. The use
of other types of units with different control systems may damage the units and invalidate the warranty.
The manufacturer shall not be responsible for damages arising from the use of non compliant units.
The air conditioner is compliant with the requirements of the Low Voltage Directive (2006/95/EC),
the EMC Directive (2004/108/EC) and the pressure equipment directive(97/23/EC).
The manufacturer shall not be responsible for damage originating from unauthorized changes or the
improper connection of electric and hydraulic lines. Failure to comply with these instructions or to comply
with the requirements set forth in the "Operating limits" table, included in the manual, shall immediately
invalidate the warranty.
Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power
supply.
In order to prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and
contact SAMSUNG's technical support if the unit produces smoke, if the power cable is hot or damaged
or if the unit is very noisy.
Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly.
These operations should be performed by qualified personnel only.
The unit contains moving parts, which should always be kept out of the reach of children.
Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these
operations may cause electric shocks or fires.
Do not place containers with liquids or other objects on the unit.
All the materials used for the manufacture and packaging of the air to water heat pump are recyclable.
The packing material and exhaust batteries of the remote control(optional) must be disposed of in
accordance with current laws.
The air to water heat pump contains a refrigerant must be disposed in authorized center or returned to
retailer as special wastes.
I
NSTALLING THE UNIT
IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the
electrical lines. Always disassemble the electric lines before the refrigerant tubes.
Upon receipt, inspect the product to verify that it has not been damaged during transport. If the product
appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the
installer or the authorized technician has collected the material from the retailer.)
After completing the installation, always carry out a functional test and provide the instructions on how
to operate the air to water heat pump to the user.
Do not use the air to water heat pump in environments with hazardous substances or close to equipment
that release free flames to avoid the occurrence of fires, explosions or injuries.
Always disconnect the air to water heat pump from the power supply before
servicing it or accessing its internal components.
Verify that installation and testing operations are performed by qualified personnel.
Verify that the air to water heat pump is not installed in an easily accessible area.
3
E-