Manual Clock Adjustment; Date Adjustment; Amp Control; Demonstration Mode Setting - Kenwood KDC-X592 Instruction Manual

Other Functions
Manual Clock Adjustment
1
Select Clock Adjustment item during Menu
mode (In Standby mode)
Select the "Clock Adjust" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Clock adjustment mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjusting Clock
- -
Selecting the item (hours or Push the Control knob towards right
minutes) or left.
."-....,....-..,,..-....,....----..,...-....,....---
Adjust each item Turn the Control knob or push it
towards up or down.
4
Exit Clock adjustment mode
Press the [FNC] button.
Date Adjustment
1
Select Date Adjustment item during Menu
mode (In Standby mode)
Select the "Date Adjust" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Date adjustment mode
Press the Control knob for at least 1 second.
The date display blinks.
3
Adjusting Date
:_--
Selecting the item (month, day, Push the Control knob towards right
or year) or left.
-------,-------
Adjust each item Turn the Control knob or push it
towards up or down.
4
Exit Date adjustment mode
Press the [FNC] button.
14
I
KDC-X592/ KDC-MP538U
Function of KDC-X592
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1
Select AMP Control item during Menu mode
Select the "AMS Control" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards up or down.
E2
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP
4
Adjust the AMP Control item
Push the Control knob towards right or left.
S
Exit AMP Control mode
Press the [FNC] button.
Demonstration mode setting
Turning the demonstration mode ON/OFF.
1
Select Demonstration item during Menu mode
Select the "DEMO Mode" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between "ON" and "OFF".
3
Exit Demonstration mode
Press the [FNC] button.