Switching Display For Tuner - Kenwood KDC-MP6090R Instruction Manual

1
Select the band/station that you want to have stored.
2
Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.

Switching Display for Tuner

You can change the display used when listening to the radio.
Switching the Display:
Each time you press the DISP button, the display changes as
follows:
Programme Service name (only during RDS station reception)/
Station frequency
Radio text (only during RDS station reception)
Displaying Frequencies during programme service name
display:
Hold down the DISP button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
If the RDS station currently tuned to is transmitting no text whilst
the Radio Text Display mode is turned on, "NO TEXT" will appear
in the display. Whilst awaiting reception, "Waiting" will be
displayed.
2WARNING
To prevent accidents, drivers should not look at the display whilst
driving.
— 15 —