Station Name Preset Play (Snpp); Switching Display For Tuner; Clean Reception System Circuit (Crsc) - Kenwood KDC-1018 Instruction Manual

Tuner features
Function of the KDC-4018/KDC-4018G

Station Name Preset Play (SNPP)

You can search for the station for any station if its name has
been preset using Station Name Preset.
1
Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play
mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations whose names have not been stored will be displayed
as frequencies.
NOTE
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Once the name is displayed for the station you want to
listen to
Press the OK button.
Reception starts of the displayed station, and the station name
preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.

Switching Display for Tuner

You can change the display used when listening to the radio.
(Function of Remote)
Changing the Display:

Clean Reception System Circuit (CRSC)

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Turning CRSC On/Off:
NOTE
• Strong electrical fields (such as from power lines) may cause
• The KDC-4018/4018G has the equivalent function.
— 14 —
Function of the KDC-4018/KDC-4018G
Each time you press the CLK button, the display changes as
follows:
Station frequency
SNPS name (only when being preset)
Clock
Operation of the KDC-2018/KDC-1018
Press the CRSC button for at least one second to turn the
function on/off.
The CRSC indicator lights up when CRSC is on.
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.
For details, refer to the Clean Reception System Circuit page
for the menu settings.(page 20)