Receiving A Call - JVC KW-NT1 Instructions Manual

Using Bluetooth® mobile phone
5
Registered devices
6
Operate the Bluetooth mobile phone to
connect.
Cancel
"Connected" appears. Press [OK] to confirm the
operation.
Now connection is established and you can use the
mobile phone through the unit.
The mobile phone remains registered even
after you disconnect the mobile phone. Use
<Connection> (or activate <Auto Connect>)
to connect the same mobile phone from next time.
(☞ page 74)
To connect a registered mobile phone
1
2
3
PIN code (initial: 0000)

Receiving a call

When a call comes in...
When <Auto Answer/Reject> is set to
<Answer>
The unit answers the incoming call automatically.
(☞ page 74)
76
Select the device you want to connect.
"Connected" appears. Press [OK] to confirm the
operation.
Phone number (if acquired)