JVC KW-NT1 Instructions Manual page 69

Menu items
5
Language *
Time Format
Local Time Adjust
5
Time Zone *
5
Summer time*
Beep
Startup Message *
Shutdown Message *
Reverse Signal Polarity *
Restore Factory Default
5
* The setting varies depending on the installation settings (☞page 7).
6
* The languages available for the message are: English, Spanish, French, German, Italian, Dutch, Portuguese, Danish
and Swedish.
For entering the characters, ☞ page 12.
7
*
Selectable settings
Select the language used for on-screen information and voice guidance.
English, Español, Français, Deutsch, Italiano, Nederlands, Dansk,
Svenska, Português, Ceština, Suomi, Norsk, Polski, Türkçe,
Eλληνικα, Magyar
Select either 12-hour system or 24-hour system.
12 Hours, 24 Hours
Select <Auto> to set your time zone for clock adjustment.
Auto, Manual
• When selecting <Manual>, set your time zone through <Time
Zone> and <Summer time>.
• When the time zone is not adjusted correctly by selecting <Auto>,
change the setting to <Manual> and set your time zone manually.
Select your residential area from one of the following time zones for
clock adjustment.
UTC, UTC+01:00, UTC+02:00
Activate this if your residential area is subject to summer time.
Auto : Activates summer time.
Off : Cancels.
On: Activates the key-touch tone.
Off: Cancels.
6
Edit the voice message at startup/shutdown of the System.
• To edit the message, press [Edit], enter the message, then press
6
7
[OK].* You can listen to the edited message by pressing [Test].
5
Battery, GND (☞ page 7)
Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation
setting screen (☞ page 7).
67
Initial: Underlined