Using Bluetooth Mobile Phone; Receiving A Call; Adjusting The Volume Of Calls/Earpiece - JVC KW-NT500HDT Instructions Manual

Using Bluetooth mobile phone

Receiving a call

When a call comes in/making a call...
On map screen:
The mobile phone control bars appear.
On AV screen:
• Phone operation is not available while the picture
from the rear view camera is displayed (☞ page 87).
When <Auto Answer> is set to <On>
The unit answers the incoming call automatically.
(☞ page 86)
About icons for category of the phone number
Icons which indicate the category of the phone
number appear when the phone number is shown.
The category icons shown may differ depending on
the connected mobile phone.
EN_KW-NT500HDT_NT300[J].indb 99 EN_KW-NT500HDT_NT300[J].indb 99
Ends/rejects the call
Call information (if acquired)
Ends/rejects the call
Adjusting the volume of calls/
earpiece
Decrease
• This adjustment does not affect the volume level of
the other sources.
• About the adjustable volume range, ☞ page 73
(<Amplifier>).
This adjustment does not affect the microphone
volume. It is adjusted automatically.
Category icon
99
Increase
12/7/2011 1:06:37 PM 12/7/2011 1:06:37 PM