Table of Contents
Advertisement
3.3.2 Security
This screen allows you to set authentication types and the parameters for secure wireless
communications. Please "Enable" when you would like the security function works.
3.3.2.1 WEP
Authentication Type: Select the type from the listed options. If WEP is selected, the screen would
appear as above.
WEP Type: You can choose to use Open system or Shared key.
Mode: Select the key code you want to use for WEP Key, HEX or ASCII. When Hex is selected, you may
enter alphanumeric characters in the range of "A-F", "a-f" and "0-9" in the WEP Key entry field.
Alternatively, you may enter digit hexadecimal values in the range of "a-z", "A-Z" and "0-9".
WEP Key: Select the level of encryption you want from the drop-down list. WRT-415 supports 64, and
128-bit encryption.
Key 1 ~ Key 4: There are 4 keys available, please ensure you have enter correct number for the key
values with different Key Length and coding (Hex or ASCII) as 64bit (10 Hex digit / 5 ASCII), 128bit (26
Hex digit / 13 ASCII) or 256bit (58 Hex digit / 29 ASCII), please select one of them and enter the key you
want to use. Click "Clear" to erase key values.
Note: 128bit WEP encryption will require more system resources than 64bit encryption. Use 64-bit
encryption for better performance.
- 16 -
Advertisement
Table of Contents
