Kenwood CD-2280M Instruction Manual page 21

In regard to disc information reading
The entered title name is read in to the disc with the
following timing.
÷ When the door panel is closed.
÷ With closed door panel, when title name mode is cancelled (except
during the continuous play mode).
DISPLAY-A : The display flashes.
D D I S C C R
When there are discs for which the disc information already has been
read in, there may be no display.
Do not move or exchange discs until the disc information
has been read in.
To enter the track title
1 Select the track number.
1. Select the disc number.
2. Select the track number.
3. Press the SET key.
2 Select a character.
Press until the character to be entered
comes to the position of the flashing
cursor.
3 Press the SET key.
4 Store the track title.
1. For discs corresponding to CD-TEXT, a new title name can not be registered.
Notes Notes
2. As the entered title names and the CD-TEXT title information are memorized, the information may be displayed even when a disc has been
removed.
E A D I N G 3
∞ DISC SKIP 5
CHARACTER/SEARCH
4 ¢
DOWN UP
SET
CHARACTER/SEARCH
4 ¢
DOWN UP
SET
ENTER
: Keys and controls used in the operations described on this page.
DISPLAY-A
D 0 0 1 C T 0
÷ The characters also can be selected with the DISC SKIP knob on the
main unit (provided that the OPERATION-A indicator is lit). Turn the
knob until the character to be entered comes to the position of the
flashing cursor.
÷ One character is set and the cursor goes to the next digit.
÷ Input the entire track title by repeating 2 and 3 for each character.
T I T L E I S
÷ Up to 20 track titles can be registered per disc by repeating steps from
1-2 to 4 for each.
To exit title name mode
Press the MODE key.
Registration of Title Name
CD-2280M/DPF-J9010 (En)
7
= >
Z B A C
Flashing cursor
T O R E ! ! O M
21