Emc, Safety And Other Applicable Standards; Fcc Compliance Statement - Logic Controls LR3000 User Manual

LR3000 Thermal Printer. Revision 1.0

EMC, Safety and Other Applicable Standards

Product Name: LR3000
The following standards apply only to the products that are so labeled.
(EMC is tested using the Wearnes WDS060240 power supply).
North America:
Europe:
Mexico:

5. FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC
emission limits. Logic Controls is not responsible for any radio or television interference
caused by using other than recommended cables and connectors or by unauthorized
changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CE Marking
The product conforms to the following Directives and Norms:
Directive 89/336/EEC
This product has been tested and found to comply with the limits for Class A Information
Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for
Class A equipment were derived for commercial and industrial environments to provide
reasonable protection against interference with licensed communication equipment.
Important: This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
EMI: FCC Class A
CE Marking
EN 55022 Class A
EN 55024
IEC 61000-3-3
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
Safety: UL 60950
Safety: EN 60950
Safety: NOM-019-SCFI-1998
7