Warning Indications
Indication
CHECK LENS COVER
SET DATE/TIME!
COMMUNICATING ERROR
CANNOT USE IN
VIDEO MODE
NOT FORMATTED
FORMAT ERROR!
DATA DELETION ERROR
FAILURE TO SAVE
HDD ERROR!
MEMORY CARD ERROR!
UP TO 3 STILL IMAGES CAN
BE TAKEN DURING
RECORDING
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
DROP DETECTION WORKED AND
THE POWER IS TURNED OFF
RECORDING CANCELLED
•
Slide the lens cover switch to open the lens cover.
•
Set the date and time. (Connect the camera to an AC outlet
using the AC adapter for over 24 hours to charge the clock's
built-in lithium battery. Then set the date/time.)
•
Detach the battery pack once and re-attach it firmly.
•
Set [REC MEDIA FOR VIDEO] in the [BASIC SETTINGS] to
[HDD].
•
Replace the microSD card.
•
Select [OK] and select [YES] when [DO YOU WANT TO
FORMAT? ALL DATA WILL BE ERASED] appears.
•
Check the operating procedure, and perform once again.
•
Turn off the camera, and turn it on again.
•
Perform cleanup or formatting.
•
Remove and re-insert the microSD card. (MultiMediaCard
cannot be used.)
•
Remove any dirt from the microSD card terminals.
•
Insert the microSD card before switching the power on.
•
Turn off the camera, and turn it on again.
•
Stop video recording, and then record a still image.
•
Set the mode switch to still images, and then record a still
image.
•
Stop video recording, and then record a still image. (If an
microSD card is removed or inserted during video recording, a
still image cannot be recorded.)
•
Set [REC MEDIA FOR VIDEO] in the [BASIC SETTINGS] to
[SD], then record to a microSD card.
Action
EN