JVC GZ-HD10 Manual Book page 51

Hd hard disk camcorder
Hide thumbs Also See for GZ-HD10:
Table of Contents

Advertisement

Y BASIC SETTINGS menus
9 LANGUAGE
Sets the display language. (Z p. 17)
: CLOCK ADJUST
Sets the time. (Z p. 17)
; DATE DISPLAY STYLE
Sets the date and time display
format.
\
MONITOR BRIGHT
Sets the brightness of the LCD
monitor.
C
MONITOR BACKLIGHT
Enables you to adjust the brightness
of backlight on the monitor.
^
DROP DETECTION
Prevents damage to the HDD by
turning off the power automatically
when it is detected that the camera
dropped.
[
DEMO MODE
Introduces special features of the
camera when there is no operation
for about 3 minutes during recording
mode.
% DISPLAY ON TV
Displays camera's on-screen display
on a TV screen.
Settings: [ ] = Factory-preset
[ENGLISH]
You have a choice of 23 languages.
DATE / TIME
DATE STYLE:
month.day.year / year.month.day / [day.month.year]
TIME:
[24h] / 12h
Adjust the brightness of the display by moving the set lever
to £ / ¤, then press down.
BRIGHTER: Brightens the backlight on the monitor
regardless of the surrounding conditions.
STANDARD: Select this when saving the battery life.
[AUTO] : The brightness will automatically be set
to [BRIGHTER] when using outdoors and to
[STANDARD] when using indoors. (when using the
battery pack)
OFF: Deactivates the function.
[ON]: Activates the function.
To turn on the camera when the drop detection
worked, close the LCD monitor and open it again.
CAUTION
The built-in hard disk of the camera may not be protected
even if the setting is [ON].
When recording/playback stops even if the camera is not
dropped, set the setting to [OFF] or set [REC MEDIA FOR
VIDEO] in the [BASIC SETTINGS] to [SD]. (Z p. 53)
OFF: Deactivates the function.
[ON]: Activates the function.
NOTES
The demonstration only works when the AC adapter is
connected, not with the battery.
If a microSD card is in the camera, demonstration will not
take place even if this mode is set to [ON].
[OFF]: Does not display on TV.
ON: Displays on TV.
NOTE
When connected to a TV using the i.LINK connector, the
camera's on-screen display is not displayed on the TV, even if
this setting is [ON].
1
EN

Advertisement

Table of Contents
loading

Table of Contents