JVC GZ-HD10 Manual Book page 57

Trouble
The colour of images
looks strange.
Noise can be heard.
Images look unnatural
on the TV (long and thin
etc.)
When dubbing, the
connected video device
does not start recording
automatically.
The camera operates
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
The camera gets hot.
The lamp does not flash
during battery charging.
The remote control
doesn't work.
•
When recording the white balance was not correctly adjusted.
•
When the video was recorded with x.v.Colour™ set to [ON],
change the setting as desired on TV.
•
Set [EFFECT] to [OFF].
•
Do not move the camera suddenly during recording. (If the camera
is moved suddenly during recording, the driving sound (hum) of
the hard disk may have been recorded.)
•
Change [VIDEO OUTPUT] in the [BASIC SETTINGS] to match
your TV.
•
Operate the video device manually to start and stop recording.
•
Copy all files from the media onto your computer, and erase the
files from the media.
(If there are many still images (more than 1,000 files) on the
media, it takes time for the camera to process the files.)
•
This is not a malfunction.
•
Check the remaining battery charge.
(When the battery is fully charged, the lamp does not flash.)
•
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery is being recharged outside the permitted
temperature range, recharging may stop to protect the battery.)
•
Replace the battery.
•
Set [REMOTE] in the [BASIC SETTINGS] to [ON].
•
The remote control may not operate outdoors or in places
exposed to strong light.
Action

EN