Connecting Wires To Terminals - Kenwood KRC-366 Instruction Manual

Connecting Wires to Terminals

If no connections are made, do not let the wire come out from the tab.
5 When using the optional power amplifier,
connect to its power control terminal.
7 Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
Ignition key
switch
10
Car fuse box
(Main fuse)
11
+
Battery
2 KENWOOD disc changer control input
To connect the Disc changer,
consult your Disc changer
manual. 3
P.CONT
ANT.
CONT.
ACC 13
Car fuse
box 14
Ground wire (Black) · (To car chassis)
–
12
Rear left output (White)
Fuse (10A)
24
Wiring harness
(Accessory1)25
4
Power control wire (Blue/White) 15
Motor antenna control wire (Blue)
17
Ignition wire (Red) 20
Battery wire (Yellow) 21
22
— 17 —
23
Front left output (White)
(KRC-566 only)
FM/AM antenna input
Front right output (Red)
(KRC-566 only) 27
Rear right output (Red) 28
29
White/Black
FRONT • L
White
31
32
Gray/Black
To front right
speaker
FRONT • R
Gray
34
35
Green/Black
REAR • L
Green
37
38
Purple/Black
REAR • R
Purple
40
26
1
To front left
speaker 30
33
To rear left
speaker 36
To rear right
speaker 39