Setting The Destination After Replacing The Bu Board; Resetting To Factory Defaults - Sony KDL-40XBR9 Service Manual

2-4. SETTING THE DESTINATION AFTER
REPLACING THE BU BOARD
By default, the data value set for the Destination information on the
replacement BU Board is set to 3 for US and Canada models. To
change the destination to 17 for Mexico and Latin America models,
use the following steps:
1. Access Service Mode.
Press the following buttons on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
QM 0 0
INFO
SOFTWARE VERSION
PACKAGE:
MAIN MICRO PROGRAM:
BOOT:
USER DATA:
SERVICE DATA:
AUDIO PACK DATA:
VIDEO PACK DATA:
SUB MICRO PROGRAM:
BOOT:
DATA:
Digital Service Menu
2. To display the Chassis menu, press JUMP on the Remote
Commander.
SUB
000
000
Default Destination is set
for US/CND models
3. For Mexico and Latin America models only, press Channel 3 until the
data value of the DESTINATION is set to 17.
SUB
000
000
For Mexico and Latin America models,
set the data value to 17
CAUTION: Verify the DESTINATION is set to 17 before proceeding
to the next step. If another destination data value is selected, it
may possibly corrupt the software which would require a BU Board
replacement.
KDL-40XBR9/46XBR9/52XBR9
Volume + TV POWER .
SERVICE
DTV
aa0048pn
DM1.00A.1000
DB1.002W(REL)
DU1.003A
DS1.003A
DA1.000D
DV1.001A
SM1.001W00AA
SB0.011W00AA
SD0.041W00AA
SERVICE
MODEL
DESTINATION 3
SERVICE
MODEL
DESTINATION 17
4. To write the data press MUTE, and then press Channel 0 .
SUB
000
000
5. To set the data to provide the correct auto programming options,
press Channel 8 , then press MUTE, and then press Channel 0 .
SUB
000
000
6. Go through the initial setup and verify that the South American
regions display.

2-5. RESETTING TO FACTORY DEFAULTS

Use the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander, press the
POWER button on the Front Panel of the set.
The set restarts and displays the initial setup screen. This may take
several minutes.
KDL-40XBR9/46XBR9/52XBR9
WRITE
MODEL
DESTINATION 17
RST-EXE
MODEL
DESTINATION 17
43