1-1. REAR COVER REMOVAL
1-1-1. KDL-40/46XBR9 REAR COVER REMOVAL
1
Remove 8 screws from Rear Cover
2
Remove 1 screw from Side Jack position
3
Remove 1 screw from Terminal position
4
Remove 4 screws near the VESA positions
5
Remove 3 screws from Bottom Frame positions
6
Carefully lift the Rear Cover bottom side up and rotate toward top side
7
Release from clamps and remove Rear Cover from Front Cabinet Assembly
NOTE:
The Rear Cover is attached to Front Cabinet Assembly with small clamps.
Use caution when removing the Rear Cover not to damage these clamps.
To re-install the Rear Cover, press to lock the clamps into positions.
KDL-40XBR9/46XBR9/52XBR9
SECTION 1: DISASSEMBLY
KDL-40XBR9/46XBR9/52XBR9
13