Updating Model Information After Replacing The Fb1 Board Or Fb3 Board - Sony KDL-40VL130 Service Manual

2-3. UPDATING MODEL INFORMATION
AFTER REPLACING THE FB1 BOARD
OR FB3 BOARD
Complete the following steps to reset the model information to the
correct size after replacing the FB1 Board or FB3 Board.
1. Access the Service Menu by pressing the following buttons on the
Remote Commander within a second:
Channel 5
DISPLAY
The service menu displays.
JUMP
2. Press the button until the BEM micro service menu displays.
BEM
BOOT:
MAIN:
DATA:
3. Press 2 until the 0001 MODEL_INFO category displays.
BEM
0001 MODEL_INFO
0001 PANEL_SIZE
DIFF
4. Do one of the following:
If the model size is 40" Verify the value is set to 0.
If the model size is 52"
Press 3 until the value increases to 2.
5. To write to memory, press MUTING then 0 on the Remote
Commander.
8. To exit service mode, turn the power off.
KDL-40VL130/52W3000/52WL130/52WL135
Volume + TV POWER .
SERVICE
0. 026W00AU
0. 050W00AU
0. 049A00LUW
SERVICE
0
Update
according to
1
panel size
KDL-40VL130/52W3000/52WL130/52WL135
22