HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-40XBR3 RM-YD013 US/CANADA KDL-46XBR3 RM-YD013 US/CANADA ORIGINAL MANUAL ISSUE DATE: 8/2006 REVISION DATE SUBJECT 8/2006 No revisions or updates are applicable at this time. LCD DIGITAL COLOR TELEVISION...
Page 2
Self Diagnosis Supported model SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-40XBR3 RM-YD013 US/CANADA KDL-46XBR3 RM-YD013 US/CANADA KDL-40XBR3 RM-YD013 LCD DIGITAL COLOR TELEVISION 9-883-717-01...
5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A and other countries. “BRAVIA” and are trademarks of Sony Corporation. ® As an ENERGY STAR Partner, Sony Corporation has ®...
Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifies dans le present manuel.
KDL-40XBR3/46XBR3 SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identified with shading and mark on the sc specified in the electrical parts list to prevent electric shock, fire, or other hazard.
Page 8
Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com KDL-40XBR3/46XBR3...
KDL-40XBR3/46XBR3 SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes).
KDL-40XBR3/46XBR3 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model Control Buttons POWER CHANNEL VOLUME POWER CHANNEL VOLUME TV/VIDEO PIC OFF/TIMER STANDBY POWER MENU TV/VIDEO MENU PIC OFF/TIMER STANDBY POWER Description of LED Indictors LED Type Description Green LED * Light when the TV set is on...
Page 11
KDL-40XBR3/46XBR3 The units in this manual contain a self-diagnostic function. If an error occurs, the POWER LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the POWER LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
KDL-40XBR3/46XBR3 1-2. STAND ASSEMBLY REMOVAL Two screws (+BVST 4X12) Two screws (+PSW M5X12) Two screws (+BVST 4X12) Arm assembly (L) Two screws (+PSW M5X12) Arm assembly (R) One screw (+BVST 4X12) Stand assembly One screw (+BVST 4X12) Critical: Must be laying flat before removing brackets.
KDL-40XBR3/46XBR3 G1 BOARD REMOVAL Five screws Disconnect CN6501, CN6502, CN6204, (+BVST 3X8) CN6203, CN 6202 and CN6001 G1 board Release wires from Wire Holders on A6501, A6205 and A6013 Use tweezers pinch in white PCB holder to release G1 Board...
KDL-40XBR3/46XBR3 SECTION 2: SERVICE ADJUSTMENTS 2-1. REMOTE ADJUSTMENT BUTTONS AND 2-2. ACCESSING SERVICE ADJUSTMENTS INDICATORS To adjust various set features, use the Remote Commander to put the set into service mode to display the service menus. TV POWER 1. TV must be in standby mode. (Power off).
Page 46
KDL-40XBR3/46XBR3 The screen displays the fi rst category in the selected service menu. 4. To change the category, press 2 or 5 on the Remote Commander. Note: Pressing 2 or 5 only changes the categories within the service menu displayed. To change a category on one of the other service menus, press the JUMP button until the correct service menu is displayed.
KDL-40XBR3/46XBR3 2-3. WHITE BALANCE ADJUSTMENT a. Set following registers to Off: Black Corrector Adjust the White Balance using the User Menu and the Service Menu Advanced C.E. when you replace boards or the LCD Panel. Gamma 2-3-1. USER MENU ADJUSTMENTS...
6. Repeat steps 4 & 5 for each of the following items: a. 5 GAING (data value is fi xed at 512) b. 6 GAINB - Do not increase the higher than 540 (KDL-40XBR3) 530 (KDL-46XBR3) c. 8 OFFR d. 9 OFFG (data value is fi...
Page 51
KDL-40XBR3/46XBR3 REFERENCE INFORMATION Terminal name of semiconductors in silk screen printed circuit ( RESISTOR CAPACITOR : RN METAL FILM : TA TANTALUM Circuit Device Printed symbol Terminal name : RC SOLID : PS STYROL Collector : FPRD NONFLAMMABLE CARBON : PP...
KDL-40XBR3/46XBR3 QM BOARD SCHEMATIC DIAGRAM (1 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
KDL-40XBR3/46XBR3 QM BOARD SCHEMATIC DIAGRAM (2 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
KDL-40XBR3/46XBR3 QM BOARD SCHEMATIC DIAGRAM (3 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
KDL-40XBR3/46XBR3 QM BOARD SCHEMATIC DIAGRAM (4 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
KDL-40XBR3/46XBR3 QM BOARD SCHEMATIC DIAGRAM (5 OF 5) Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only.
KDL-40XBR3/46XBR3 QT BOARD SCHEMATIC DIAGRAM Due to the complexity of this board, performing component level fi eld repairs is not recommended. If service is required, complete board replacement is the preferred repair method. Data is provided for reference only. SET_CTRL...
KDL-40XBR3/46XBR3 NOTE: The components identified by shading and mark are critical for safety. NOTE: Les composants identifies per un trame et une marque sont critiques pour Replace only with part number specified. la securite. Ne les remplacer que par une piece portant le numero specifie.
KDL-40XBR3/46XBR3 SECTION 5: ELECTRICAL PARTS LIST Items marked with an asterisk are not stocked since they NOTE: The components identifi ed by shading RESISTORS are seldom required for routine service. Expect some delay mark are critical for safety. Replace only •...
Page 116
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 118
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 137
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 152
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 153
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 154
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 155
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 156
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 157
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 158
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 159
KDL-40XBR3/46XBR3 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R6792 1-249-417-11 CARBON 1/4W R6938 1-218-833-11 METAL CHIP 0.50% 1/10W R6793 1-216-809-11 METAL CHIP 1/10W R6939 1-218-833-11 METAL CHIP 0.50% 1/10W R6794 1-216-797-11 METAL CHIP 1/10W R6940...
Page 160
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 161
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 162
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 163
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 164
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 165
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 166
KDL-40XBR3/46XBR3 NOTE: Les composants identifies per un trame et une NOTE: The components identified by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifie.
Page 167
KDL-40XBR3/46XBR3 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES A-1171-665-A H1 BOARD, MOUNTED A-1171-667-A H3 BOARD, MOUNTED LED HOLDER CAPACITOR A3001 2-686-289-03 LED HOLDER C3000 1-162-970-11 CERAMIC CHIP 0.01µF A3002 2-686-289-03 LED HOLDER C3001 1-162-970-11 CERAMIC CHIP 0.01µF...
Page 172
In an effort to reduce the size of this pdf file the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to the Service Promotion Department at Service_Promotion@am.sony.com.