Zone Control - Kenwood KVT-534DVDM Instruction Manual

Audio Control

Zone Control

You can set the front and rear audio source.
1 Display Zone Control
Touch
Control Menu" screen (page 80).
1 Displays the current source.
2 Set the Zone Control
2
2 Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
3 Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
4 Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
82 KVT-534DVD/KVT-534DVDM
in the "Audio
1
3
3
4
⁄
• There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- <Audio Setup> (page 58) and <Equalizer Control>
(page 81) are not available.
- When "DVD" or "USB" is selected as the front source, the
rear source can be selected from "Front" (same source
as front), "iPod" or "VIDEO", etc. When the rear source is
set to "Front", "DVD" or "USB", the same source screen or
control screen is displayed in the rear monitor. See <AV
Interface Setup> (page 64).