Activate/Deactivate The Remote Control - Num'axes Canicom 5.201 Instruction Manual

Icons on the LCD screen
First use from new
●
 Fitting the battery in the CANICOM 5 receiver collar
 Activate/deactivate the remote control
Remote control is supplied with battery fitted.
Activate: press the On/Off button
▪
the LCD screen.
Deactivate: press the On/Off button
▪
out.
To increase the battery life, we recommend you to deactivate the remote control if you are not using it
for a long period.
 Activate/deactivate the receiver collar
You can activate/deactivate the receiver collar with the all-in-one accessory or with the remote control.
 Activate/deactivate the collar with the all-in-one accessory
A magnet located in the all-in-one accessory allows you to either switch On or Off the receiver collar.
Activate: move the magnet located in the accessory towards the collar so that it comes into contact with the
▪
symbol located on the collar, hold for 1 second (ref. Diagram 5).
The indicator light on the collar will flash in green indicating the collar is On.
Deactivate: move the magnet located in the accessory towards the collar so that it comes into contact with
▪
the symbol located on the collar, hold for 1 second (ref. Diagram 5).
The indicator light on the collar flashes from green to red then goes out indicating the collar is Off.
CANICOM 5 range - user's guide– indice A
indicates emission of beep sounds at the collar
indicates emission of vibrations at the collar
indicates emission of static stimulations at the collar
indicates emission of static stimulations at the collar
(intensity = level programmed on the Booster button)
indicates the intensity level of the static stimulations
WARNING
When inserting the battery,
make sure to follow polarity
indicated on the collar.
Fitting the battery in the CANICOM 5 receiver collar
located on the remote control for 1 second. Indications appear on
Definition
Diagram 4
located on the remote control for 1 second. The LCD screen is
4/12