Table of Contents
Advertisement
External disc control features
Fast Forwarding and Reversing Disc Play
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
You cannot use reverse play between tracks dipending on the
model being conncected. Instead, the reverse play function is
cancelled when it reaches the beginning of a track, at which point
normal play automatically resumes.
Track Search
Search forwards or backwards through the tracks on the disc
until you reach the one that you want to listen to.
Making a Reverse Track Search:
Press the 4 (T. DN...Remote
track number.
Press once to search back to the beginning of the current track,
twice to search back to the beginning of the previous track, and
so forth.
Play starts at the beginning of the displayed track number.
NOTE
Pressing the 4 (T. DN...Remote
1 only searches back to the beginning of that track. The reverse
search is not "recycled" to the last track on the disc.
Making a Forward Track Search:
Press the ¢ (T. UP...Remote
track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
Play starts at the beginning of the displayed track number.
NOTE
You cannot make a forward track search when listening to the last
track on a disc.
)
button to display the desired
)
button whilst listening to track
)
button to display the desired
Disc Search
Search forwards or backwards through the discs in a disc
changer until you reach the one that you want to listen to.
Making a Reverse Disc Search :
–
Press the
button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search :
+
Press the
button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.
Direct Track Search
Using the remote control, make direct input of the track
number that you want to listen to.
1
Using the number buttons on the remote control, enter the
number of the track that you want to listen to.
The selected track number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
2
Press either the T. DN or T. UP button whilst the track number is
blinking.
The track specified in step 1 starts playing.
Cancelling Direct Track Search During Its Operation:
Press the 38 button.
NOTE
For the entry of the 100th or higher tunes, enter three digits for
search while only two digits are displayed.
— 6 —
Function of Remote
Advertisement
Table of Contents
