Changing the Transmission Frequency
To set the frequency change mode
Hold down the REP button for more than three seconds. The
FREQ indicator will light up and the currently set frequency will
F R E Q
• The initial value is 88.3MHz.
• If this function is on, the functions other than power on / off,
reset, and modulation level / dynamic control, cannot be
• This function is not available when the random play, repeat play,
or scan play function is on. Before using this function, cancell
the other functions. This function cannot be used while loading
a disc (while the play indicator is blinking).
To change the frequency
Press the 4 or ¢ button on the display unit.
The transmission frequency will change as follows :
88.3MHz (initial value)
M H z
To cancell :
Hold down the REP button on the display unit for more than
The FREQ indicator will go off and the frequency change will
The frequency change mode is automatically cancelled if you
do nothing for 15 seconds.
— 9 —