Table of Contents
Advertisement
Troubleshooting guide
The following messages are displayed when certain
problems are occurring in your system. Take the
recommended actions.
01 E:
No disc magazine has been loaded in the changer. The disc
magazine is not completely loaded.
]
Load the disc magazine properly.
02 E:
No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine.
04 E:
No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine
The CD/MD is quite dirty. The CD/MD is upside-down.
The CD/MD is scratched a lot.
]
Clean the CD/MD and load it correctly.
10 E:
Nothing has been recorded on the MD.
]
The next MD will automatically be played.
11 E:
No tracks are recorded on the MD, although it has a title.
]
The next MD will automatically be played.
12 E:
Now reading the data in the disk.
]
Normal playback is resumed upon completing the reading of
the disk data.
77 E:
The unit is malfunctioning for some reason.
]
Press the reset button on the unit. If the "77E"code does not
disappear, consult your nearest service center.
99 E:
Something is wrong with the disc magazine. Or the unit is
malfunctioning for some reason.
]
Check the disc magazine. And then, press the reset button
on the unit. If the "99E" code does not disappear, consult
your nearest service center.
0d E:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer exceeds 60°C
(140°F), stopping all operation.
]
Cool down the unit by opening the windows or turning on
the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.
Specifications
Specifications subject to change without notice.
Modulating Frequency (200KHz STEP) ............87.7, 87.9, 88.1, 88.3,
General
Operating Voltage ................................................14.4 V (11 ~ 16 V)
Current consumption ..............................................................1.4 A
Operating Temperature ................................................–10 ~ 50 °C
Size (W × H × D)
Controler ........................................................50 × 145 × 24 mm
Display unit ....................................................105 × 40 × 18 mm
FM modulator unit ..........................................150 × 30 × 80 mm
Trim mount plate ..............................................188 × 58 × 2 mm
Weight
Controler ................................................................60 g (0.14 lbs)
Display unit ..........................................................125 g (0.28 lbs)
FM modulator unit ..................................................600 g (1.3 lbs)
— 16 —
88.5, 88.7, 88.9, 89.1,
89.3, 89.5, 89.7,
89.9,
MHz
(1-15/16 × 5-11/16 × 15/16 in.)
(4-1/8 × 1-9/16 × 11/16 in.)
(5-7/8 × 1-3/16 × 3-1/8 in.)
(7-3/8 × 2-5/16 × 1/16 in.)
Advertisement
Table of Contents
