Vision Fitness T9800 Series Owner's Manual page 30

COOL-DOWN MODE
After you have completed your
timed workout, the console will
display: "COOL DOWN." This is to let
you know that your program has
ended. You are now in a
manual mode cool-down and
have control of the speed and
elevation. This lets you cool down
at your own pace.
ENDING THE PROGRAM
Once you feel your cool-down has
elapsed, press the STOP button
and the Treadmill will stop.
NOTES FOR YOUR HEART RATE TRAINING PROGRAMS
• If there is no heart rate detected, the Treadmill will not adjust elevation.
• If the heart rate detected is higher than the target zone by 10 BPM, the
console will "beep" and the dot matrix will display a warning message.
• If the heart rate detected is higher than the target zone by 15 BPM, the
console will "beep" and the dot matrix will display a warning message.
This process will repeat until the heart rate has been reduced. If the
Treadmill is at 0% elevation, the speed will decrease by one mph.
• If the user's heart rate is 20 beats over their target zone, the Treadmill
will shut down.
NOTE:
At all times, the speed and elevation keys are operative for the user.
26