Power & Emergency Stop - Vision Fitness T9800 Series Owner's Manual

POWER
Ensure that your Treadmill is
properly connected to the Treadmill
and a power outlet, then turn on
the power switch, located at the
front of the main frame. For safety,
remove the power cord when the
Treadmill is not in use.
EMERGENCY STOP
If at any time you need to stop the
Treadmill quickly, simply press the
Emergency Stop button. This will
instantly cut all power and the
Treadmill will come to a stop. To
resume your workout, you will
need to re-enter any data.
SAFETY MAGNET KEY & CLIP
Your VISION FITNESS Treadmill
will not start unless the Safety
Magnet Key is inserted into the
circle in the console overlay. You
should attach the clip end to your
clothing. If at any time you need to
stop the Treadmill quickly simply
pull the Safety Magnet Key off the
console. This will cut all power to
the Treadmill, and it will come to a
complete stop. To resume your
workout, place the Safety Magnet
Key back in place. This will send
you back to the start-up mode.
7