Resetting The Recording Setups; Setting The Cf Card ...................................................... 24 14 Setting The Beep Tone - Olympus DP20 Instructions Manual

12

Resetting the Recording Setups

}The setups related to recording can be reset to the factory
defaults. This function is used when you have forgotten the
setups you made previously.
Reset items and their factory defaults
· Picture quality:
· ISO:
· Sharpness:
· White balance:
· Power supply:
· Focusing area display: ON
· AE area display:
· Exposure adjustment: ±0
· Metering mode:
· Focus indicator setting:OFF
13 Setting the CF Card
}This item erases all pictures recorded in a CF card.
# All picture erasure using ALL ERASE may take a long time
if the CF card contains a large number of pictures. In this
case, it is recommended to use FORMAT.
}To cancel erasure during ALL ERASE, press the MENU but-
ton.
Note that the pictures that have been deleted before the can-
cellation cannot be recovered.
· After selecting the ALL ERASE icon, press the SET/OK button. When the confirmation screen appears, select "YES" if you
want to erase all pictures. Select "NO" to cancel the operation.
· All-picture erasure can erase only the non-protected pictures.
· If it is required to erase protected pictures also, unprotect them before proceeding or format the CF card
(see bellow).
· It is only the DCF format pictures that can be erased by all-picture erasure. To erase pictures in other formats,
erase them one by one.
DCF: Digital Camera image format standardized by the Japan Electronic Industry Development Association
}This item is also used to format (initialize) a CF card.
· A CF card which has been formatted by a PC or a digital camera other than the DP20 should be formatted on the DP20
before use.
· When a CF card is formatted, all data which has been recorded in it will be lost.
· During formatting, the control box accepts no other operation and the CARD access indicator LED blinks.
· When a CF card is formatted, even the protected (
· After selecting the FORAMT icon, press the SET/OK button. When the confirmation screen appears, select "YES" if you
want to format the CF card. Select "NO" to cancel the operation.
24
HQ
100
Normal
AUTO
QUICK REV (5 sec)/SLEEP (OFF)
OFF
30% average
(JEIDA).
) pictures will be lost.
Factory setup: ----
To reset.
Factory setup: ----
Formatting
(Initialization)
All-picture erasure