Honda 2012 TRX420TM Owner's Manual page 202

If You Have a Flat Tire
Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel
rim ( ). 2
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV to the
ground before tightening the nuts in a crisscross (rather than circular)
pattern to the specified torque:
47 lbf·ft (64 N·m , 6.5 kgf·m)
If a torque wrench was not used for installation, see your dealer as soon
as possible to verify proper assembly. Improper assembly may lead to
loss of braking capability.
194 Taking Care of the Unexpected