Honda 2012 TRX420TM Owner's Manual page 161

Draining Water from Brakes
Refer to Saf ety Precautions
RIGHT REAR
(1)
(1) rear brake drain bolt
1. Make sure the engine is OFF and the parking brake is set.
2. Remove the rear brake drain bolt ( ) from the bottom of the rear
brake panel.
If any water drains, the brake seals must be replaced by your dealer as
soon as possible.
3. Install the rear brake drain bolt and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
on page 89 .
1
Servicing Your Honda
Brakes
153