Touch Sensor Tone; Manual Clock Adjustment - Kenwood KDC-MP928 Instruction Manual

Kenwood cd-receiver instruction manual kdc-mp928

Hide thumbs Also See for KDC-MP928:

Service manual (52 pages)

Table Of Contents

Table of Contents

• When you activate the Security Code function, the code

cannot be changed and the function cannot be released.

Note, you can set the Security Code with a 4 digit

number of your choice.

Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

Enter Menu mode

Press the [MENU] button for at least 1 second.

When "MENU" is displayed, "Security" is also

displayed.

Enter Security Code mode

Press the Control knob for at least 1 second.

When "Enter" is displayed, "CODE" is also

displayed.

Select the digits to enter

Push the Control knob towards [4] or

[¢].

Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

Repeat steps 4 and 5, and complete the

Security Code.

Confirm the Security Code

Press the Control knob for at least 3 seconds.

When "Re-Enter" is displayed, "CODE" is also

displayed.

Do the step 4 through 7 operation, and

reenter the Security Code.

"Appoved" is displayed.

The Security Code function activates.

• If you enter the wrong Code in steps 4 through 6,

repeat from step 4.

Exit Security Code mode

Press the [MENU] button.

Press the Reset button when the audio unit is

removed from the battery power source

Turn the power ON.

Do the step 4 through 7 operation, and enter

the Security Code.

"Appoved" is displayed.

You can being using the unit.

In Standby mode